Why Pothole Repair Is Important?

Potholes sometimes referred to as chuckholes that can be the cause of serious trip-and-fall accidents. Potholes are unsafe. These potholes may be small but in time they will grow and can become a serious issue if they are left unfixed. Due to the poor conditions of roads and nature, the surface area develops pockmarks and deep divots unsuitable and unsafe for driving on. This is because moisture allows it to soak into the asphalt that can destabilize the asphalt and contribute to the development of cracks and holes.

It is therefore extremely important to repair any potholes and to maintain the condition of their pavement. 

Stop Worrying About The Potholes In The Road And Enjoy The Journey!

However, what is not so commonly known is that potholes cause more damage and injury than might be expected. In fact, potholes can cause damage to cars that repeatedly strike these hazards in the road. From automobiles suspension systems to tires and even brakes, potholes can wreak havoc on typical residential vehicles or even on commercial vehicles.

If timely maintenance isn’t performed, cracks become big and form potholes and potholes become craters. If your Pavement area has a pothole, one of the best things you can do to prevent the development of more potholes is to repair the problem.

Sooner you repair it, more safer & beautiful it will look from outside!

In order to fix your Pothole problems, we should follow the basic steps required to fix a pothole.

Pothole Repairs In Toronto


STEP 1:  Prepare The Area To Remove

Prepare the area by removing any loose asphalt pieces, dirt, or other debris.


  • Use a hammer or asphalt saw to remove any cracked pieces of asphalt around the edges.
  • Allow to cut the edges by using a shovel for longer-lasting, durable repair.

STEP 2: Clean The Pothole

This is an important step that is required when you need to repair potholes. Most of the online guides skip this step- they just begin with actually applying the patch or asphalt to the pothole. There are various tools that can be used for cleaning purpose. Patching a hole that is filled with water and debris virtually guarantees the patch will lift, disintegrate, etc. so be sure to clean the Pothole!


  • Clean the pothole area to be repaired thoroughly.
  • It is not necessary to remove all dirt and dust but make sure there is no loose debris or any lager objects left inside the pothole.
  • It is important to remove such materials because that could hinder the patch or asphalt from sealing correctly and preventing water and the elements from creeping under the patch.

STEP 3: Heat The Pothole

The Pothole area or cracks must be dry for proper adhesion to occur. This is required to remove removes any extra moisture that may be in the existing pavement or cracks and also softens the area so the new asphalt can be applied.  Once it is softened, the pothole can also be reshaped and old asphalt can be removed or rejuvenated.

STEP 4: Fill The Pothole With Patch Material

There are two types of methods that can be used to repair your pothole, hot asphalt patch or cold asphalt patch.


  • Mound the patch material in the hole
  • Using a lute, rake the patch material so that you can see the edges of the hole and material does not overflow the hole.
  • Where there is unevenness, make it a priority to take excess patch from one part of the pothole and spread it to the sections that need it. An even material spread will pay dividends later on in the repair process and in the long term life of the repair job.

STEP 5:  Compact The Patch Material

There are different ways to compact pothole repairs. From the least effective method to the most effective.


You can probably pound a little more…The final step is to compact the pothole. The more compacted the pothole patch, the higher quality of the patch and the longer it will last. This fastest way to accomplish pothole repair that is simply lay plywood down and drive over the repairs thoroughly compacted if you don’t have a tamping machine. A few runs are usually sufficient to seal the pothole.

The final height of the patch should be 1/4 inch higher than the surrounding area to allow for future settling to allow water to drain off of the patch.

STEP 6: Clean Up

This is another extremely important step that is often neglected in the “how-to” guides.

Once you’ve packed your pothole, take a shop broom or a leaf blower and clean away the loose asphalt around the pothole. Sweep it off to one side and collect it or sweep the loose crumbs onto the pothole and pack it into the patch. Either way, make a point to remove the loose debris from on and around the pothole. Leaving loose debris and patch material is unsightly and creates a hazard on the road.

STEP 7: Say Goodbye To This Pothole For Good And Move On!

Your pothole is now repaired for good… so say goodbye because you won’t be returning to fix it again.

By committing to a new method – by following these steps – cities and town will save tens of thousands of dollars in pothole repair costs. Going back to the same hole over and over again is wasteful, frustrating, and ultimately costs much more than fixing the hole correctly right from the start.

Did You Find This Post Useful?

If you are still confused, you need to take the advice of our experts & we’re sure you’re going to have a smoother drive! 

By analyzing the above details provided by our specialists, you will be able to take the best decision according to your circumstances.

Contact a Reputable Asphalt Professional for Help

The Main Infrastructure, provides various types of Potholes repairs in Toronto according to your need.

If you are looking for Pothole Repair services in Toronto, The Main Infrastructure offers safe, innovative and reliable services.

Call Us:  +1 (416) 514 0809Pothole Repair In Toronto


1 thought on “7 Steps Required To Fix A Pothole Repairs In Toronto, ON!!

Leave a Reply

Your email address will not be published. Required fields are marked *