Are You Looking Services For Infrared Asphalt Patching In Toronto?
HERE IS THE SOLUTION!!
There are variety of different application for the utilization of asphalt pavement because of its durability, cost-effectiveness, simplicity of construction, and strength. In order to maximize the life of your asphalt, it is important to develop a pavement management plan involving routine inspections and ongoing preventative maintenance.
What Do You Understand By “Infrared Asphalt Patching”?
Infrared Asphalt Patching is also referred to as cold weather patching or seamless cold weather asphalt repair. It is an alternative to cold patch asphalt and a temporary solution to pavement failures. Infrared Asphalt Patching in Toronto is a cost efficient and ideal method for patching up critical problems, including potholes, cracks, asphalt pavement and rough surfaces.
Infrared Asphalt Patching is a technique which uses infrared technology to heat up the damaged asphalt to remove the damaged material.
This process combines hot-mix asphalt with the new asphalt or recycled asphalt with undamaged areas and then the area is reworked. The entire area is compacted with a vibratory compactor for a smooth, and seamless finish.
If you look at your asphalt surface and notice potholes, divots, cracks, heaving, or any other kind of uneven areas you may want to consider infrared asphalt patching services.
7 Benefits of Infrared Asphalt Patching
- Requires Less Time
- Uses Infrared Technology
- Less Equipment Are Needed
- Requires Limited People
- Environmental Friendly
- Save Time And Money
- Less Traffic Interruptions
#1: Requires Less Time
Infrared Patching is far longer and faster than any other methods for repairing cracks and asphalt pavement. It usually requires only 30 minutes to complete the work. On the other hand, with this method the repair could last as long as the surrounding pavement as well as it takes less time to accomplish the project in a day.
#2: Uses Infrared Technology
With traditional methods, there is always a seam or joint that prevents further entry of water and allow water to penetrate beneath the surface. Infrared technology allows crews to eliminate these seams. It proves to be an efficient and effective method that prevents future admission of water and moisture that leads to cracking and deterioration. It provides a smooth, uniform surface that is easy and pleasant to drive on.
#3: Less Equipment Are Needed
Very little new material is needed, reducing material purchasing costs by 80 percent. This results in repairing more roads at a cheaper cost! Also Quick and Fast Completion of Project helps in reducing traffic jams and construction road blocks for daily commuters. This makes infrared pavement repair beneficial to everyone!
#4: Requires Limited People
It generally requires only one infrared unit, the supplies, and 2 or 3 people for completion of the project. This method is easy to set up, which allow the workers to start the work in a right way reducing labor cost for pavement repair companies.
#5 : Environmental Friendly
Another Important benefit of using Infrared Asphalt patching is that it is more environmentally friendly way of repairing asphalt. Meanwhile operation is quick, fast and easy, so there is no noise pollution like jackhammers and loud construction equipment. It’s easy for the workers to implement, and it’s easy on the community’s hears.
#6: Save Time And Money
One of the main advantage of infrared Asphalt patching is cost. In terms of both time and money, asphalt repairs with infrared are far less intensive and expensive. This also results in eliminating further damage, liability, deterioration, and pavement-related headaches.
#7: Less Traffic Interruptions
Disruption to traffic flow are kept to a minimum. Asphalt repairs can be done in a short period of time after it has been installed. This method allow the roads to be immediately reopened to traffic so that you never have down time conducting your business.
In short, infrared asphalt repair a newer, more cost-efficient way of getting the job done quickly.
Related Post: What Are The Different Methods Of Pothole Repairs In Toronto?
Why choose Infrared Asphalt Patching in Toronto?
This method is an economical solution that allows Asphalt Management to recycle the existing asphalt paving through the use of Infrared Rays. With the infrared method, the damaged area is heated from inside out, around 325 degrees, penetrating the asphalt to a depth of 3″ to 4″.
Once it is soft and flexible, deteriorated asphalt is removed and new asphalt is blended into the old. As new asphalt is mixed with the old asphalt, there are no seams that can fail and require subsequent repairs.
A typical Asphalt repair can often be made in minutes, rather than the hours required for the traditional method. Normal traffic flow can resume in as little as one or two hours. The blending of old and new asphalt also creates a strong bond that will often allow the patched area to last as long as the rest of the pavement.
Therefore, Infrared Asphalt in Toronto is the best pavement repair investment for the money!!
Did You Find This Post Useful?
If You are still confused, you need to take the advice of our experts & we’re sure you’re going to take the best decision according to your circumstances.
WHY MAIN INFRASTRUCTURE?
The Main Infrastructure will provide strategically repair in most advantageous places to get the most efficient service possible. Asphalt Pavement Solutions is a full-service asphalt repair and maintenance provider.
It provides various types of repairs for Infrared Asphalt Patching in Toronto according to your need. We have a team of professionally certified technicians who can perform most maintenance and repairs at your location.
Whether you need your asphalt pavement repaired, we have well-trained, experienced crews who can deliver superior results at competitive rates.
We provide:
- Annual inspections and certifications
- On-site service repairs
- Customized periodic maintenance schedules
- Safety First
- 24/7 service commitment
- Fully trained operators
